Table of Contents
Advertisement
Headrest
To adjust the headrest:
1.
Loosen the headrest's screw with an
Allen key.
2.
Set the headrest at the right height and
tighten the screw.
3.
Loosen the headrest's nuts with an
open-end wrench.
4.
The height, depth and angle can be
adjusted simultaneously. Now tighten
the nuts again.
Please note: make sure the handlebars can
easily move after setting up the headrest.
Adjustable seat width
The width of the chair can be fully tuned to the
passenger.
To do this:
1.
Loosen the two nuts on the back of
the pillow with an open-end
wrench.
2.
Slide the supports so that they fit the
body of the passenger. Tighten the
nuts
Version 24.01
3.
2.
1.
4.
1.
2.
37/55
Advertisement
Table of Contents
