Table of Contents
Advertisement
6.
Remove the safety pin.
7.
Hold the rear part (tricycle part) with
one hand and then use your other hand
to pull the lever backwards [A],
allowing the tricycle to detach. The
wheelchair section will tilt forward
when the passenger is in it. Otherwise
the wheelchair will rest on the
supporting wheel.
8.
Remove the tricycle part from the
coupling. Please note: this part is heavy.
Firmly hold the frame with both hands.
9.
Place the rear part on the stand.
You can now walk with the wheelchair part.
Please note: the handlebars locks automatically.
In order to put the tricycle back together, simply
follow these steps in reverse order.
Make sure the wheelchair rests on the front nose wheels when the back frame is
attached. As soon as the frame has been attached, the wheelchair section can be
titled backwards due to which the connection snaps into place.
Version 24.01
8.
6.
5.
7.
[A]
9.
36/55
Advertisement
Table of Contents
