Wav Import Page; Assign A Wav File To A Sampling Pad - Yamaha AW4416 Reference Manual

SAMP. PAD screen
Assign a WAV file to a sampling pad
[Function]
Import a WAV format audio file from a CD-
ROM or MO disk inserted in the internal
CD-RW drive or an external SCSI device,
and assign it to a sampling pad.
[Key operation]
• Sampling pad section [EDIT] pad
(WavImport) key
• Repeatedly press the [EDIT] pad until the
screen shown at the right appears.
[Mouse operation]
M button SAMP. PAD EDIT button
WavImport tab
[Screen functions]
A
DRIVE
Move the cursor to this area and rotate the
[DATA/JOG] dial to select the internal CD-RW
drive or external SCSI device.
B
ASSIGN TO
Select the pad to which you wish to assign the
WAV file. Pads to which no sample is assigned
are displayed as "-NO ASN-".
C
File list
This shows a list of the WAV files on the internal
CD-RW drive or external SCSI device. This list
contains the following information.
FILE
The file name/directory name is displayed.
icons indicate WAV files, and
directories.
TOTAL
The playback time of the WAV file is displayed
in hours/minutes/seconds/milliseconds.
TYPE
The stereo ( )/monaural (
file and its quantization (word length) is dis-
played.
84
— Reference Guide

WAV Import page

1
[F3]
3
4
files indicate
) status of the WAV
2
The AW4416 can recognize only WAV files
that have the same sampling frequency as the
current song which have a filename exten-
sion of ".WAV" following their name. Other
files will not be displayed in the list.
D
DIR (directory)
The "/" symbol and the directory name indicate
the directory in which the list shown in 3 is
located. For example this will indicate "/" if you
are in the highest level (root directory), or "/
WAV/" if you are in a directory named WAV
located one level lower.
E
EXECUTE button
This button executes the WAV file import.
5