Yamaha AW4416 Reference Manual page 156

DELAY->ER.
Delay and early reflections effects in series.
Parameter
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB.DLY 0.0–1000.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
S-Hall, L-Hall, Random,
TYPE
Revers, Plate, Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
DLY/ER 0–100%
MIX BAL. 0–100 [%]
DELAY+REV
Delay and reverb effects in parallel.
Parameter
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB.DLY 0.0–1000.0 ms
FB.GAIN –99 to +99%
DELAY HI 0.1–1.0
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
DLY/REV 0–100%
MIX BAL. 0–100 [%]
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
High-frequency feedback ratio
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reverb diffusion (left-right reverb spreed)
Reverb density
Number of early reflections
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and early reflected delay balance (0% = early reflected delay,
100% = delay)
Mix balance of the effects and dry sounds
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Delay high-frequency feedback ratio
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and reverb balance (0% = reverb, 100% = delay)
Mix balance of the effects and dry sounds
Description
Description
Appendix–
— Reference Guide
Appendix
21