Prefer.1 Page; Make Overall Settings For The Aw4416 (1) - Yamaha AW4416 Reference Manual

UTILITY screen

Make overall settings for the AW4416 (1)

[Function]
Enable/disable warning messages,
and specify the point from which
direct output will be taken.
[Key operation]
• [UTILITY] key [F2] (Prefer.1)
key
• Repeatedly press the [UTILITY]
key until the screen shown at the
right appears.
[Mouse operation]
M button UTIL button
fer.1 tab
[Screen functions]
A
AUTO EQ DISPLAY
B
AUTO PAN DISPLAY
If the 1 or 2 buttons are ON, operating the
[EQ] controls or [PAN] control located at the
right of the display will cause the corresponding
page to automatically appear in the display.
(Default=off)
Tip!
If buttons 1 / 2 are off, the current EQ/pan
settings will appear in the upper right of the
display when you operate the [EQ]/[PAN]
controls.
C
STORE CONFIRMATION
D
RECALL CONFIRMATION
If the 3 or 4 buttons are ON, a popup window
will ask you to confirm the operation when stor-
ing or recalling a scene or library. (Default=on)
E
DIRECT OUT EXTRACT POSITION
Use the following three buttons to select the
position from which the signal will be taken for
direct output from input channels 1–24.
• PRE EQ button..............Immediately before
• PRE FADER button........Pre-fader position
• POST FADER button.....Post-fader position
34
— Reference Guide

Prefer.1 page

1
2
3
4
Pre-
the EQ
(default)
F
DIGITAL ST IN SYNC CAUTION
G
OPTION IN SYNC CAUTION
If the 6 or 7 buttons are ON, an error message
will be displayed if a digital signal that cannot
be synchronized with the word clock source is
input from the DIGITAL STEREO IN jack or from
an optional I/O card. (Default=on)
5
6
7