Yamaha AW4416 Reference Manual page 22

C
RECORDER TRACK INPUT ASSIGN
Here you can select the signals to be assigned
to the inputs of tracks 1–16. The following sig-
nals can be assigned.
Recorder inputs 1–16
Display
BUS 1–BUS 8 Bus 1–8
Input channel direct out 1–
DIR 1–DIR16
16
Tip!
For detai ls on operations in the Patch IN
page, refer to Operation Guide "Chapter 8.
Patching. "
Signal type
Additional functions in the Patch
IN page
In the Patch IN page you can press the [SHIFT] key
to assign the following function to the [F1] key.
F1
• [F1] (CHANGE TAB) key
Switch between the following two tab displays.
SET UP screen
15
— Reference Guide