Restore Page; Restore Backed-Up Songs - Yamaha AW4416 Reference Manual

FILE screen

Restore backed-up songs

[Function]
Restore songs from the backup desti-
nation SCSI device to the AW4416's
internal hard disk.
[Key operation]
• [FILE] key [F2] (Restore) key
• Repeatedly press the [FILE] key
until the screen shown at the right
appears.
[Mouse operation]
M button FILE button
[Screen functions]
A
Song list
This list shows the songs saved on the backup
destination SCSI device. Songs selected for
restore are indicated by a " " symbol in the
RESTORE column.
The following information is also shown in the list.
• SONG NAME .. Song name
• SAVED AT ........ Date and time at which the
song was last saved on the
AW4416's internal hard disk
• SIZE ................. Data size of the song
• BIT/FS ............... Quantization (word length)/
sampling frequency of the song
• PRT.................. Song protect on/off setting
B RESTORE SONG button
This button selects whether the song currently
selected in the song list 1 will be included in
the restore (ENABLE) or excluded from the
restore (DISABLE). Move the cursor to this but-
ton and press the [ENTER] key to switch
between ENABLE and DISABLE.
C
ALL ENABLE button
If you move the cursor to this button and press
the [ENTER] key, all songs will be selected for
restore.
D
ALL DISABLE button
If you move the cursor to this button and press
the [ENTER] key, all songs will be excluded
from the restore.
E SOURCE
This selects the ID number of the SCSI device
on which the data was backed up.
30
— Reference Guide

Restore page

1
2
5
Restore tab
F
DESTINATION
This shows the restore destination drive (internal
hard disk). This item is for display only, and can-
not be modified.
G
EXECUTE button
Execute the song restore.
Tip!
For details on song restore, refer to Operation Guide
"Chapter 16. Backing up and restoring songs. "
If a removable media drive (e.g., MO) is
selected, go to the UTILITY screen Prefer.3 page,
and in the REMOVABLE BACKUP area, set the
TYPE setting to the format that you used when
backing up. Do this before you execute Restore.
Additional functions in the
Restore page
In the Restore page you can press the [SHIFT] key to
assign the following functions to the [F1]–[F3] keys.
F1 F2
• [F1] (CD LOAD) key
Close the open tray of the CD-RW drive.
• [F2] (CD UNLOAD) key
Eject the tray of the CD-RW drive.
• [F3] (RELOAD) key
Reload the removable media and update the
displayed list.
3
4
6
7
F3