Yamaha AW4416 Reference Manual page 52

G
PAN
Adjust the panning between the L/
R channels of the stereo bus or
between odd-numbered
numbered buses.
Tip!
If you move the cursor to the
PAN knob and press the
[ENTER] key, the knob will
move to the center position.
H
Fader group
This area shows the fader group to
which the channel belongs. You
can also defeat or register groups
in this page.
I
Mute group
This area shows the mute group to
which the channel belongs. You
can also defeat or register groups
in this page.
J
Input/output meter
This shows the input level of the
input channel, monitor channel,
or return channel, and the output
level of the stereo output channel.
K Pair
This shows the pairing status. Pair-
ing can also be set/defeated in this
page.
L
ASSIGN button
Use this button to insert an exter-
nal effect or internal effect into the
channel.
Move the cursor to this button and
press the [ENTER] key to access a
screen like the following.
OFF button
When this button is on, an effect will not be
inserted.
INT.EFF 1 button
When this button is on, internal effect 1 will be
inserted into the corresponding channel.
Return channel
1
even-
3
5
Stereo output channel
1
3
4
2 6 7
7
INT.EFF 2 button
When this button is on, internal effect 2 will be
inserted into the corresponding channel.
When inserting the internal effect 1/2 into a
channel, you must set either EFF1 or EFF2 to
"INSERT" in the SETUP screen Patch IN page.
If neither of the effects is set to "INSERT, "
attempting to turn on the INT.EFF1/INT.EFF2
button in this screen will produce an error
message of "ERROR INT. EFF NOW
SELECTED AUX. "
EXTERNAL button
When this button is on, you can select the
desired input and output jacks for use as the
insert send/return jacks for the corresponding
channel.
VIEW screen
J
L
M
N
O
J
L
M
O
45
— Reference Guide