Effects Parameters - Yamaha AW4416 Reference Manual

Appendix
REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
Hall, room, stage, and plate simulations, all with gates.
Parameter
REV TIME 0.3–99.0 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
LO.RATIO 0.1–2.4
DIFF. 0–10
DENSITY 0–100%
E/R DLY 0.0–100.0 ms
E/R BAL. 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
GATE LVL OFF, –60 to 0 dB
ATTACK 0–120 ms
*1
HOLD
*2
DECAY
MIX BAL. 0–100 [%]
*1. 0.02 ms–2.13 s (fs=44.1 kHz), 0.02 ms–1.96 s (fs=48 kHz)
*2. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz)
EARLY REF.
Early reflections.
Parameter
S-Hall, L-Hall, Random,
TYPE
Reverse, Plate, Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
MIX BAL. 0–100 [%]
8
Appendix–

Effects Parameters

Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
Delay between early reflections and reverb
Balance of early reflections and reverb (0% = ER, 100% = reverb)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Level at which gate kicks in
Gate opening speed
Gate open time
Gate closing speed
Mix balance of the effects and dry sounds
Range
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
Number of early reflections
Feedback gain
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Mix balance of the effects and dry sounds
— Reference Guide
Description
Description