Yamaha AW4416 Reference Manual page 34

LAST SOLO
When the Solo function is on, only the channel
last-selected by pressing its [ON] key will be
monitored.
MIX SOLO
When the Solo function is on, all channels
selected by pressing their [ON] keys will be
monitored.
D
LEVEL
This adjusts the level of the signal that is sent to
the SOLO bus when RECORDING SOLO mode
is selected for 1.
E
SOLO SAFE CHANNEL
This area selects the channels that will be
excluded from the Solo function when MIX-
DOWN SOLO is selected for 1. Channels that
are turned on in this area will not be affected
when you press the [SOLO] key.
Additional functions in the Solo
Setup page
In the Solo Setup page, you can press the [SHIFT]
key to assign the following function to the [F1] key.
F1
• [F1] (CHANGE TAB) key
Switch between the two types of tab display.
SET UP screen
27
— Reference Guide