Recording From An External Component Onto A Cd-R Or Cd-Rw Disc - Yamaha CDR-HD1300 Owner's Manual

RECORDING FROM AN EXTERNAL COMPONENT ONTO A CD-R OR CD-RW DISC

You can record from an external component directly to a CD-R or CD-RW disc. Following is an explanation for digital recording from an
external CD player connected to the DIGITAL IN (OPTICAL) or DIGITAL IN (COAXIAL) jacks on this unit.
Note
• Before starting to record, check the remaining time available for recording on the CD-R or CD-RW disc (see page 11).
NATURAL SOUND HDD/CD RECORDER
POWER
HDD CDR COPY
PHONES LEVEL
A.M.Q.R.
MIN MAX
1.
Load a new CD-R or CD-RW disc, or a CD-R or CD-
RW disc without finalization.
Press v (OPEN/CLOSE on the remote control) to open the
disc tray, and place a CD-R or CD-RW disc with its recordable
side facing down. Then press v (OPEN/CLOSE on the remote
control) to close the disc tray.
2.
Press REC.
OPC may start on the loaded CD-R or CD-RW disc depending
on its recording condition. It takes approximately 15 seconds to
complete the adjustment.
If this unit determines that OPC is not needed for the disc
loaded, "Standby" flashes on the display.
The following message appears on the display and this unit
enters the recording pause mode.
Note
• If you leave this unit in the recording pause mode for
approximately 5 minutes, this unit returns to the stop mode
automatically.
3.
Select the input source to be recorded.
When making a digital recording from an external CD player,
press INPUT until the OPTICAL or COAXIAL indicator
lights up.
When making an analog recording...
Press INPUT until the ANALOG indicator lights up.
1
1
REC
2 9
REC
L
dB –30 –10 –6 –2 0
SYNC CDR
R
REC
L
dB –30 –10 –6 –2 0
SYNC CDR
R
REC
L
dB –30 –10 –6 –2 0
CDR
SYNC
R
1
4 4
9
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
6 3 8
4.
Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
to suit your needs.
Play the loudest passage (highest sound level) of the source to
be recorded.
By pressing MENU, the display changes for the level
adjustment. Rotate the MULTI JOG knob (press +/– on the
remote control) to adjust the recording level. When the
adjustment is completed, press MULTI JOG knob (ENTER on
the remote control) to confirm the adjusted recording level.
When making an analog recording...
Rotate the ANALOG REC LEVEL control to adjust the
recording level.
Note
• Adjust the recording level so that the red part on the peak
level meter does not light at the loudest sound levels.
See "Adjusting the Recording Level" on page 24 for details.
5.
Select a recording mode.
If you wish to record only one track, select "Multi Synchro"
and set to 1 track for the number of tracks to be recorded.
If you wish to start and stop recording, and place track markers
automatically, select "All Synchro".
If you wish to automatically make finalization on a CD-R or
CD-RW disc as well, select "Full Auto".
See "Setting the recording mode" on page 69 for details.
4 JKL 5 MNO
7 STU 8 VWX
OPEN/CLOSE
+
0 10
SPACE SYMBOL
COPY TIMER REC REC
2
REPEAT RANDOM
A.M.Q.R. FINALIZE ERASE
TRACK NO.
TEXT/TIME INPUT WRITE
GROUP SKIP
3
MODE MENU
4
COMPLETE
4
HDD
CLEAR ENTER
4
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
+
0 10
SPACE SYMBOL BOOKMARK
REPEAT RANDOM NTRO
6 PQR
9 YZ
BOOKMARK
INTRO
6
6
CDR
8
67
E-