Yamaha CDR-HD1300 Owner's Manual page 71

I Copying menu setting
You can make detailed settings on the menu for your copying.
Follow the steps described below for menu setting.
ER
COPY
A.M.Q.R.
COPY
A.M.Q.R. FINALIZE
TEXT/TIME
MODE
COMPLETE
+, –
CLEAR
1 ABC
1.
Press MENU while this unit is in the copy standby
mode.
You can start setting the copying menu.
2.
Select the menu item to be set by rotating the MULTI
JOG knob (pressing +/– on the remote control).
The copying menu contains 3 items as follows:
• Copy Method (setting the copying method)
• Copy Level (setting the copying level)
• Copy Speed (setting the copying speed)
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the menu item to be adjusted.
4.
Adjust the parameter for each item by rotating the
MULTI JOG knob (pressing +/– on the remote
control).
See the further steps for detailed instructions on parameter
adjustment for each item.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6.
Press MENU to close the menu.
This unit returns to the copy standby mode.
MULTI JOG MENU
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
OPEN/CLOSE
TIMER REC REC
ERASE
TRACK NO.
INPUT WRITE
MENU
MENU
ENTER
ENTER
2 DEF 3 GHI
COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC
I Copy Method
Setting of the copying method. Copying may fail if the setting for
"Copy Method" is not correctly made.
Initial setting: Analog Copy
Analog Copy
This method always makes analog copies.
Digital Move
The data is moved from the HDD to the CD. Therefore, the track or
group data will be deleted from the HDD after they have been
moved to the CD-R or CD-RW disc by this method.
Digital Copy
This method always makes digital copies. Copying is not possible if
the tracks are copy protected by the SCMS standard (see page 5).
Auto Dig/Anlg
Digital and analog copying are automatically switched depending
on the track. If digital copying is prohibited by the SCMS standard
(see page 5), an analog copy is made. For those tracks that can be
digitally copied, a digital copy is made.
Notes
• In analog copying, the data may be copied at a lower sound level.
• The settings is stored in the memory and applied to future
copying.
REC
L
dB –30 –10 –6 –2 0
ALL SYNC ANLG CDR
R
65
E-