Yamaha CDR-HD1300 Owner's Manual page 29

I Setting for a timer recording
NATURAL SOUND HDD/CD RECORDER
POWER
HDD CDR COPY
PHONES LEVEL
A.M.Q.R.
MIN MAX
1 2
1.
Turn on the power of this unit by pressing POWER on
the front panel.
2.
Press HDD to select the HDD.
Notes
• A timer recording cannot be made when recording onto a
CD-R or CD-RW disc.
• You can directly go to step 7 to set the total time of timer
recording by pressing TIMER REC on the remote control.
3.
Press REC.
This unit enters the recording pause mode.
4.
Select the input source to be recorded.
Press INPUT to select the input source from among OPTI-
CAL, COAXIAL, and ANALOG.
5.
Adjust the recording level.
See "Adjusting the Recording Level" on page 24.
6.
Select a recording mode.
Select one of "Manual" (manual recording), "Track Synchro"
(track-synchronized recording) or "Auto Period" (auto-period
recording). Other modes cannot be selected when timer
recording is made.
7.
Press and hold REC for approximately 3 seconds
(press TIMER REC on the remote control).
Following message appears on the display. Then set the total
amount of time of timer recording.
REC
3,7
REC
L
dB –30 –10 –6 –2 0
SYNC TIME
R
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
6 5,6,8,9 5
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE
CLEAR
BOOKMARK
DIGITAL REC LEVEL
5,6,8,9
INPUT ANALOG REC LEVEL
FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
4 5
8.
Rotate the MULTI JOG knob (press +/– on the remote
control) to set the total time of timer recording.
Total time can be set as long as the recordable maximum time
by 1-minute step.
9.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the total time of timer recording.
"Timer Standby" appears on the display.
G
To cancel timer recording setting, press a.
10.
Leave the power of this unit on. Turn off the power of
this unit by the external timer.
If the power of this unit is turned on by the external timer,
"Timer Standby" flashes for approximately 5 seconds. Then
recording starts according to the setting.
Note
• Once timer recording is set, recording starts every time the
power of this unit is turned on. To cancel the setting, press a
while "Timer Standby" is flashing, or while recording is
being made.
OPEN/CLOSE
3,7
COPY TIMER REC REC
2,7
A.M.Q.R. FINALIZE ERASE
TRACK NO.
TEXT/TIME INPUT WRITE
4
MODE MENU
6
COMPLETE
2
CLEAR ENTER
9
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
+
0 10
SPACE SYMBOL BOOKMARK
REPEAT RANDOM NTRO
L
dB –30 –10 –6 –2 0
R
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
+
0 10
SPACE SYMBOL BOOKMARK
REPEAT RANDOM INTRO
GROUP SKIP
HDD CDR
23
E-