Finalization - Yamaha CDR-HD1300 Owner's Manual

Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player or a CD-RW disc to be
played on a CD-RW-compatible player.
ER
COPY
A.M.Q.R.
1
1.
Load a recorded CD-R or CD-RW disc without

finalization.

2.
Press FINALIZE.
To cancel finalization, press a.
If you wish to make finalization at slower speed, press and hold
FINALIZE for approximately 3 seconds.
The following message appears on the display and this unit
enters the slow finalization mode.
3.
Press w/d (w on the remote control) to start finaliza-
tion.
The level meter shows the finalization progress on the display.
When starting finalization
During finalization
70
E-
FINALIZATION
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE
CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
2 3 2
L
dB –30 –10 –6 –2 0
CDR
R
L
dB –30 –10 –6 –2 0
CDR
R
REC
CDR
CDR
CDR
OPEN/CLOSE
COPY TIMER REC REC
A.M.Q.R. FINALIZE ERASE
2
TRACK NO.
TEXT/TIME INPUT WRITE
MODE MENU
COMPLETE
CLEAR ENTER
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
+
0 10
SPACE SYMBOL BOOKMARK
REPEAT RANDOM NTRO
When finalization is completed, the TOC indicator lights up
and this unit enters the stop mode.
When a CD-R disc has been finalized
When a CD-RW disc has been finalized
Cautions
• Further recording is not possible onto a finalized CD-R disc.
Make sure that all recordings have been completed before
finalization.
• Make sure a CD-R or CD-RW disc has no scratches, dust,
fingerprints or similar marks before loading. Wipe a CD-R or
CD-RW disc if there is any dust on it.
See page 4 for handling of a CD-R or CD-RW disc.
• Once the finalization process has started, no other operation
is possible until finalization is completed.
• Never turn off the power or disconnect the power cord during
finalization.
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
+
0 10
SPACE SYMBOL BOOKMARK
REPEAT RANDOM INTRO
GROUP SKIP
3
HDD CDR
2
TOC
CDR
TOC
CDRW