Table of Contents
Advertisement
DISC EDITING
I Editing during playback
1.
Select and confirm "Disc Divide" in step 2 of "Editing
during playback" on page 52.
The disc being played is confirmed to be divided.
"Div.from" and the dividing point (the number of the track to
be the first after dividing) appear on the display.
G
Track to be the first after dividing
2.
Select the dividing point by rotating the MULTI JOG
knob (pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the dividing point.
Press CLEAR to cancel the confirmed selection.
4.
Press COMPLETE.
The disc being played is divided into two at the set dividing
point.
Playback resumes from the beginning of the second disc of the
two divided discs.
Caution
• The HDD can contain up to 999 discs. If the HDD already
contains 999 discs, "Disc No.Full" appears on the display.
Note
• The disc numbers following the divided disc will be up-numbered
by one. However, if there is any unused disc number, only the
discs up to that number will be up-numbered.
Before "Disc Divide" is performed
1
2
Divided into two
1
2
3
After "Disc Divide" has been performed (dividing a disc into two)
: Space not being used
56
E-
TRACK
L
dB
–30 –10
–6
–2
0
R
4
5
6
4
5
6
Disc Pack
You can re-organize the disc numbers by eliminating unused disc
numbers that have been created by changing disc numbers or
erasing discs.
1.
Select and confirm "Disc Pack" in step 5 of "Editing
during the stop mode" on page 52.
The following message appears on the display.
2.
Press COMPLETE.
The disc numbers are re-organized by eliminating unused disc
numbers.
This unit returns to the editing menu item selection.
Before "Disc Pack" is performed
1
3
1
2
3
After "Disc Pack" has been performed (Unused disc numbers
have been eliminated.)
: Unused disc numbers
L
dB
–30 –10
–6
–2
0
R
4
6
4
5
6
Hide quick links:
Advertisement
Table of Contents
