Track Divide - Yamaha CDR-HD1300 Owner's Manual

TRACK EDITING

Track Divide

You can divide a track into two at the selected point.
I Editing during the stop mode
1.
Select and confirm "Track Divide" in step 5 of
"Editing during the stop mode" on page 39.
The following message appears on the display.
Disc that contains the track to be divided
The disc number that contains the track to be divided flashes.
2.
Select the disc that contains the track to be divided
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
be divided.
The number of the track to be divided flashes.
Press CLEAR to cancel the confirmed selection.
4.
Select the track to be divided by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to be divided.
The passage between the temporary dividing point (the point
that is 10 seconds elapsed from the beginning of the track) and
the point that is 5 seconds after the temporary dividing point is
repeatedly played.
The following message appears on the display.
Playing time of the track
46
E-
L
GROUP
dB –30 –10 –6 –2 0
R
Track to be divided
Dividing point
TIME
6.
Set the dividing point by rotating the MULTI JOG
knob (pressing +/– on the remote control).
The dividing point can be set by "minute: second: frame". The
unit to be set is flashing. Move the flash to the unit to be set by
pressing t/e or r/y.
If you stop rotating the MULTI JOG knob, this unit searches
for the dividing point according to the setting made, and starts
repeated playback of the passage between the dividing point
and the point that is 5 seconds after the dividing point.
Dividing point
Track
7.
Press COMPLETE.
The selected track is divided into two at the set dividing point.
This unit returns to the editing menu item selection.
I Editing during playback
1.
Select and confirm "Track Divide" in step 2 of
"Editing during playback" on page 39.
The track being played is confirmed to be divided.
The passage between the dividing point (the timing you press
MENU) and the point that is 5 seconds after the dividing point
is repeatedly played.
The following message appears on the display.
G
Playing time of the track
2.
Set the dividing point by rotating the MULTI JOG
knob (pressing +/– on the remote control).
The dividing point can be set by "minute: second: frame". The
unit to be set is flashing. Move the flash to the unit to be set by
pressing t/e or r/y.
If you stop rotating the MULTI JOG knob, this unit searches
for the dividing point according to the setting made, and starts
repeated playback of the passage between the dividing point
and the point that is 5 seconds after the dividing point.
Dividing point
Track
Passage to be repeatedly played
Dividing point
TIME
Passage to be repeatedly played
Continues to next page