Add Fade In - Yamaha CDR-HD1300 Owner's Manual

TRACK EDITING

Add Fade In

You can add fade-in at the beginning of a track. The beginning of
the track is played with gradually rising level when fade-in has been
added.
I Editing during the stop mode
1.
Select and confirm "Add Fade In" in step 5 of "Editing
during the stop mode" on page 39.
The following message appears on the display.
Disc that contains the track to add fade-in
The disc number that contains the track to add fade-in flashes.
2.
Select the disc that contains the track to add fade-in
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
add fade-in.
The number of the track to add fade-in flashes.
Press CLEAR to cancel the confirmed selection.
4.
Select the track to add fade-in by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to add fade-in.
The beginning of the track for 8 seconds is repeatedly played
with a 3-second (initial setting) fade-in.
The following message appears on the display.
Fade-in length
48
E-
L GROUP
dB –30 –10 –6 –2 0
R
Track to add fade-in
L
dB –30 –10 –6 –2 0
TIME
R
Playing time of the track
6.
Rotate MULTI JOG knob (+/– on the remote control)
to set the fade-in length.
The fade-in length can be set in the 1 to 10 second range by 1-
second steps.
If you stop rotating the MULTI JOG knob, this unit starts
repeated playback of the beginning of the track with a fade-in
of the length set in above step, with extra portion for further 5
seconds.
Press CLEAR to cancel the setting.
7.
Press COMPLETE.
The fade-in is added to the beginning of the selected track for
the selected length.
This unit returns to the editing menu item selection.
I Editing during playback
1.
Select and confirm "Add Fade In" in step 2 of "Editing
during playback" on page 39.
The track being played is confirmed to add fade-in to.
The beginning of the track for 8 seconds is repeatedly played
with a 3-second (initial setting) fade-in.
The following message appears on the display.
G
2.
Rotate MULTI JOG knob (+/– on the remote control)
to set the fade-in length.
The fade-in length can be set in the 1 to 10 second range by 1-
second steps.
If you stop rotating the MULTI JOG knob, this unit starts
repeated playback of the beginning of the track with a fade-in
of the length set in above step, with extra portion for further 5
seconds.
Press CLEAR to cancel the setting.
Fade-in length
L
dB –30 –10 –6 –2 0
TIME
R
Playing time of the track
Continues to next page