Yamaha CDR-HD1300 Owner's Manual page 33

I Setting a condition for synchronized re-
cording
ER
COPY
A.M.Q.R.
OPEN/CLOSE
COPY
A.M.Q.R. FINALIZE
TEXT/TIME
MODE
COMPLETE
+, –
CLEAR
1 ABC
1.
Press MENU while this unit is in the stop mode.
Menu item selection appears on the display.
2.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select "Synchro Setup".
3.
Press the MULTI JOG knob (ENTER on the remote
control).
Setting item selection appears on the display.
4.
Rotate the MULTI JOG knob (+/– on the remote
control) to select a setting item.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting item.
If "OPT TH Level", "COAX TH Level" or "ANLG TH Level"
is confirmed, make a setting following steps 6 and 7.
If "Int. Time" or "End Duration" is confirmed, make a setting
following 8 and 9.
MULTI JOG MENU
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
TIMER REC REC
ERASE
TRACK NO.
INPUT WRITE
MENU
MENU
ENTER
ENTER
2 DEF 3 GHI
L
dB –30 –10 –6 –2 0
R
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
6.
Rotate the MULTI JOG knob (press +/– on the remote
control) to adjust the level.
Level can be set by 1dB step.
Example: To set "ANLG TH Level"
7.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the level.
Setting item selection appears on the display.
8.
Rotate the MULTI JOG knob (+/– on the remote
control) to set an interval.
"Int. Time" can be set by 0.5-second steps, and "End Duration"
can be set by 1.0-second steps.
Example: To set "Int.Time"
9.
Press the MULTI JOG knob (ENTER on the remote
control) to set an interval.
Setting item selection appears on the display.
Press MENU twice to close the menu and return to the normal stop
mode.
LEVEL
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
TIME
R
27
E-