Breckwell SP1000E Owner’s Instruction And Operation Manual page 2

This manual describes the installation and operation of the Breckwell, SP1000E wood heater. This heater meets the 2020
U.S. Environmental Protection Agency's emission limits for wood heaters sold after May 15, 2020. Under specific test
conditions this heater has been shown to deliver heat at rates ranging from 6,580 to 39,121 Btu/hr, 1.0 g/hr, and 75%
efficiency.
Heating Specifications
Fuel Burn Rate
Hopper Capacity *
Flue Size
Electrical Rating
Dimensions
Overall: Height x Width x Depth
Floor To Exhaust Pipe Center
Floor To Fresh Air Intake Center
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT WITH THE
RETAIN YOUR ORIGINAL RECEIPT FOR ANY WARRANTY CLAIMS. CONTACT YOUR DEALER OR INSTALLER IF YOU NEED
Note: Register your product by using your smart
phone with the QR code. Save your receipts with
your records for any warranty claims.
You can also register your product online at
www.breckwell.com/product-registration
© 2024 Breckwell
1 - 5.5 lbs (0.45 - 2.5 kh) per hr
Up to 140lbs. (63.5 kg)
3" or 4" (77 mm or 102 mm)
115V 60Hz 3A
25-3/4" (655 mm) X 32-5/8" (829 mm) X 23-7/8" (607 mm)
8.875" (226 mm)
6.625" (169 mm)
WARNING:
OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
TO FILE A CLAIM.
* Pellet size may affect the actual rate of fuel feed,
burn times, and hopper capacity. Fuel feed rates
may vary by as much as 20%. Use PFI listed fuel
for best results.
2
INTRODUCTION