Breckwell SWC31 Owner's Operation And Instruction Manual
  1. Manuals
  2. Brands
  3. Breckwell Manuals
  4. Stove
  5. SWC31
  6. Owner's operation and instruction manual

Breckwell SWC31 Owner's Operation And Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Operation and Instruction Manual
US ENVIRONMENTAL PROTECTION AGENCY PHASE II CERTIFIED WOODSTOVE
CAUTION!
Please read this entire manual before you install or
use your new room heater.
tions may result in property damage, bodily injury,
or even death.
Improper Installation Could Void
Your Warranty!
THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU TO OR-
DER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
French version is available for download from the Breckwell website: http://www.breckwell.com/
La version française est disponible pour téléchargement à partir du site Breckwell: http://www.breckwell.com/
MODEL: SWC31
CONFORMS TO UL STD 1482 and CERTIFIED TO ULC STD S627
WASHINGTON STATE APPROVED
MOBILE HOME APPROVED (U.S. ONLY)
Failure to follow instruc-
SAVE THESE INSTRUCTIONS
United States Stove Company
227 Industrial Park Road
South Pittsburg, TN 37380
SAFETY NOTICE:
SAFETY NOTICE:
If this heater is not properly installed, a house fi re may
If this heater is not properly installed, a house fi re may
result. For your safety, follow the installation instruc-
result. For your safety, follow the installation instruc-
tions. Never use make-shift compromises during the
tions. Never use make-shift compromises during the
installation of this heater. Contact local building or
installation of this heater. Contact local building or
fi re offi cials about permits, restrictions and installa-
fi re offi cials about permits, restrictions and installa-
tion requirements in your area.
tion requirements in your area.
P.O. Box 151
852246 B

Advertisement

Table of Contents
loading

Related Manuals for Breckwell SWC31

Summary of Contents for Breckwell SWC31

  • Page 1 DER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE. French version is available for download from the Breckwell website: http://www.breckwell.com/ La version française est disponible pour téléchargement à partir du site Breckwell: http://www.breckwell.com/ United States Stove Company 227 Industrial Park Road P.O.

  • Page 2: Motor Oil

    CONGRATULATIONS! You’ve purchased a heater from North America’s oldest manufacturer of wood burning products. By heating with wood you’re helping to CONSERVE ENERGY! Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.
  • Page 3 Tools and Materials Needed For Installation You will need a drill with a 1/8” bit to install sheet metal screws into connector pipe. A 5/16” socket/wrench or screw driver to install pedestal trim, room air defl ector, and blower assembly described below. A 1/2” socket/wrench to install fl ue collar. A non-combustible fl oor protector as specifi ed in this manual.

  • Page 4: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Blower Assembly THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL SUPPLY BEFORE ATTEMPTING THE INSTALLATION. THE BLOWER ASSEMBLY IS INTENDED FOR USE ONLY WITH A STOVE THAT IS MARKED TO INDICATE SUCH USE. DO NOT ROUTE THE SUPPLY CORD NEAR OR ACROSS HOT SURFACES! Step 1.

  • Page 5: Installation

    INSTALLATION SAFETY NOTICE • IF THIS STOVE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS. • CONSULT YOUR MUNICIPAL BUILDING DEPARTMENT OR FIRE OFFICIALS ABOUT PERMITS, RESTRICTIONS AND INSTALLATIONS REQUIREMENTS IN YOUR AREA. •...

  • Page 6: Floor Protector

    FLOOR PROTECTOR Your wood stove should be placed on a 1 inch, non-combustible surface with a k factor of 0.84. For multiple layers, add R-values of each layer to determine the overall R-value. Th e R value for the required board is 1.03. If there is a horizontal section of chimney connector, the fl oor protector should go under it and 2 inches beyond each side To calculate R-Values for alternative methods, see ALTERNATE FLOOR PROTECTOR CALCULATIONS...

  • Page 7: Clearances To Combustibles

    CLEARANCES TO COMBUSTIBLES It is of utmost importance that the clearances to combustible materials be strictly adhered to during installation of the stove. Refer to the tables below : Dimension Inch Backwall to Stove Sidewall to Stove Wall to corner (Angled Installation) Backwall to Flue 21.5 Sidewall to Flue...

  • Page 8: Chimney Connector (Stove Pipe)

    CHIMNEY CONNECTOR (STOVE PIPE) Your chimney connector and chimney must have the same diameter as the stove outlet (6”). If this is not the case, we recommend you contact your dealer in order to insure there will be no problem with the draft . Th e stove pipe must be made of aluminized or cold roll steel with a minimum thickness of 0.021”...
  • Page 9 CHIMNEY Your wood stove may be hooked up with a 6” factory built or masonry chimney. If you are using a factory built chimney, it must comply with UL 103 or CSA-B365 standard; therefore it must be a Type HT (2100°F). It is extremely important that it be installed according to the manufacturer’s specifi cations.

  • Page 10: Factory Built Chimney

    FACTORY BUILT CHIMNEY : When a metal prefabricated chimney is used, the manufacturer’s installation instructions must be followed. You must also purchase (from the same manufacturer) and install the ceiling support package or wall pass- through and “T” section package, fi restops (where needed), insulation shield, roof fl ashing, chimney cap, etc. Maintain proper clearance to the structure as recommended by the manufacturer.

  • Page 11: Masonry Chimney

    MASONRY CHIMNEY : Ensure that a masonry chimney meets the minimum standards of the National Fire Protection Association (NFPA) by having it inspected by a professional. Make sure there are no cracks, loose mortar or other signs of deterioration and blockage. Have the chimney cleaned before the stove is installed and operated. When con- necting the stove through a combustible wall to a masonry chimney, special methods are needed.
  • Page 12 Combustible Wall Chimney Connector Pass-Throughs Method A. 12” (304.8 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.5” (89 mm) brick and a 5/8” (15.9 mm) mini- mum wall thickness clay liner, construct a wall pass-through. Th e clay liner must conform to ASTM C315 (Standard Specifi cation for Clay Fire Linings) or its equivalent.

  • Page 13: Outside Combustion Air

    OUTSIDE COMBUSTION AIR Your wood stove is approved to be installed with an outside air intake which is necessary for a mobile home. Th is type of installation is also required in air tight houses and houses with negative pressure problems. You can purchase this option through your heater dealer.

  • Page 14: Woodstove Utilization

    WOODSTOVE UTILIZATION Your heating unit was designed to burn wood only; no other materials should be burned. Waste and other fl ammable materials should not be burned in your stove. Any type of wood may be used in your stove, but specifi c varieties have better energy yields than others.

  • Page 15: The First Fires

    Once the updraft movement is initiated, you are ready to ignite the stove by lighting the paper and kindling wood inside the combustion chamber. When you have achieved a good bed of hot embers, we recommend the following burn procedures: HEATING SWC31 Primary Air Settings Electric Blower Speed Setting (Variable) (Slide Damper is located in center of stove under hearth plate) (Blower is on High when turned “ON”, Rotate clockwise...
  • Page 16 WARNINGS • NEVER OVERFIRE YOUR STOVE. IF ANY PART OF THE STOVE STARTS TO GLOW RED, OVER FIRING IS HAPPENING. READJUST THE AIR INTAKE CONTROL AT A LOWER SETTING. • THE INSTALLATION OF A LOG CRADLE or GRATES IS NOT RECOMMENDED IN YOUR WOOD STOVE.

  • Page 17: Ash Disposal

    ASH DISPOSAL Ashes should be removed from the stove every few days or when ashes get to 2 to 3 inches deep. Always empty the stove when it is cold, such as in the morning. Ashes should be placed in a metal container with a tight fi tting lid.

  • Page 18: Repair Instructions

    PAINT Remember to only clean your stove with a dry soft cloth that will not harm the stoves finish. Your stove has two types of coatings that are used in the final finish; porcelain enamel and high temperature stove paint. ENAMEL REPAIR- The porcelain enamel finish will maintain its color and luster for the life of the stove.

  • Page 19: Repair Parts

    REPAIR PARTS Feed Door Assembly Ussc...
  • Page 20 REPAIR PARTS Part No. Description Qty. Feed Door Assembly 69845 MAIN WELDMENT Part No. Description Qty. 891373 PAD, DOOR HINGE (THREADED) 40569 Door, Rectangular-Large 69738 WELD., DAMPER SLIDE 40515 Handle 83506 3/8 x 1-1/4 Roll Pin 40292A 6" FLUE COLLAR 88066 5/8”...

  • Page 21: How To Order Repair Parts

    WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMA- TION AS SHOWN IN THIS LIST: 1. THE PART NUMBER 2. THE PART DESCRIPTION 3. THE MODEL NUMBER: ___________________________ 4. THE SERIAL NUMBER: ____________________________ SWC31 UNITED STATES STOVE COMPANY P.O. BOX 151 SOUTH PITTSBURG, TN 37380 (423) 837-2100 WWW.USSTOVE.COM...
  • Page 22 ALTERNATE FLOOR PROTECTOR CALCULATIONS Alternate materials may be rated with C-factor (Thermal Conductance) or k-factor (Thermal Conductivity) ratings which must be converted to R-value to determine if the alternate material meets the tested requirements. The following instructions provide the proper information and formulas for conversion to R-value. To determine if alternate materials are acceptable follow this sequence.
  • Page 23 WARRANTY INFORMATION CARD Name__________________________________________ Telephone #: (_____)_____________ City____________________________________________ State_______ Zip_________________ Email Address __________________________________________________________________ Model # of Unit________________________________ Serial #___________________________ Fuel Type: Wood Coal Pellet Gas Other _________________________ Place of Purchase (Retailer)______________________________________________________ City____________________________________________ State_______ Zip_________________ If internet purchase, please list website address___________________________________ Date of Purchase _______________________________________________________________ Alternative Heat Main Heat Source...
  • Page 24   Fold Here Fold Here Fold Here PLACE STAMP HERE United States Stove Company P.O. Box 151 South Pittsburg, TN 37380 Ussc...

Table of Contents