Switch Off The Device; Source Selection; Setting The Volume - TechniSat DIGITRADIO Bike 1 Operating Instructions Manual

4.6.2

Switch off the device

In battery mode:
Pressing the On/Standby button switches the device to power saving mode
>
and the display goes out. The message [Power off] appears briefly on the
display.
In power supply operation
Press the On/Standby button to switch the device to standby mode. The
>
message [Standby] appears briefly on the display, followed by the time/date
and the battery charge status.
4.6.3

Source selection

The Mode/Menu button (3) can be used to switch between the sources
>
DAB+ (digital radio), FM (FM) and Bluetooth. To do this, briefly press the
ok button until the desired source is shown on the display.
4.6.4

Setting the volume

Adjust the volume using the Volume + and - buttons (8, 9).
>
The set volume is shown on the display using a bar chart.
29