Route Feeder Fibers To The Tray; Reinstall The Tray; Lock The Tray; Route The Fiber To The Tray - CommScope NOVUX SEC 100 Installation Instructions Manual

the mounting surface.
2 Once correct positioned, close the clip.
3 A clicking sound is observed when closing the clip.
8

Route feeder fibers to the tray

8.1

Reinstall the tray

1
90°
1 To reinstall the tray, make sure its orientation is 90° relative to the bottom. The hinges slides in the holes.
2 The hinges of the tray will push away the locking feature in the bottom.
3 Now the tray is correctly positioned and locked into the bottom.
8.2

Lock the tray

1
1 Make sure the tray is positioned 90° relative to the bottom to lock the tray.
2 Slide the tray downwards.
3 The hinges of the tray will lock now into the squared cavities of the bottom.
8.3

Route the fiber to the tray

1
1 Remove the cover of the tray.
2 Bring the feeder fiber to the tray.
2
2
90°
2
page 11 / 14
© 2022 CommScope, Inc. All Rights Reserved
3
3