Pull Back The Fiber; Protect Window Cut To Cut Fiber - CommScope NOVUX SEC 100 Installation Instructions Manual

7.3

Pull back the fiber

1
1 To have a feeder fiber available in the closure, select the correct fiber in the opening made outside the closure.
2
2 Pull out the bundle a little bit to have easier access to the fibers.
3 Select the correct one and cut it.
4 In the closure, pick this fiber with the fiber guidance pen and pull it out.
5
5 Completely pull back the fiber. Now it is available to be used in the closure.
7.4

Protect window cut to cut fiber

1
1 To protect the window cut created to cut the selected fiber, a clip can be used. Slide the clip between the cable and
3
2
page 10 / 14
© 2022 CommScope, Inc. All Rights Reserved
4
3
CLICK