Perkins 2806A-E18TA Operation And Maintenance Manual page 25

SEBU9074-06
Illustration 20
Typical example
(15) Water temperature regulator valve
(Thermostat)
(16) Water temperature sensor
(17) Alternator drive belt
Product Description
The Perkins 2806A-E18TA, 2806A-E18TTA, 2806C-
E18TA, 2806C-E18TTA, and the 2806D-E18TA
industrial engines have the following characteristics:
• Four-stroke cycle
• Mechanically actuated, electronically controlled
fuel injection system
• Turbocharged
• Air to air charged cooled
Engine Specifications
Note: The front end of the engine is opposite the
flywheel end of the engine. The left and the right
sides of the engine are determined from the flywheel
end. The number 1 cylinder is the front cylinder.
(18) Vibration damper
(19) Water pump
(20) Oil drain plug (rear)
(21) Oil cooler
i10082735
Illustration 21
Cylinder and valve location
(A) Exhaust valve
(B) Inlet valve
Product Information Section
Product Description
(22) Flywheel housing
(23) Exhaust manifolds
25
g06237691
g03857469