Use With The Dq & Di Series Advanced System Amplifiers; Connections; Preset Recall - EM Acoustics R5 Product User Manual

6.3 - Use with the DQ & Di Series Advanced System Amplifiers
The R5 is designed to be used with DQ or Di Series advanced system amplifiers, as not only are they
state-of-the-art amplifiers, but the onboard DSP provides appropriate processing to allow the R5 to
perform as intended. Please refer to the relevant amplifier User Manual for detailed information on
using the amplifiers and the System Engineer software.

6.3.1 - Connections

6.3.2 - Preset Recall

The R5 presets are pre-installed on EM Acoustics' amplifiers (ensure you have the latest
preset library installed on your amplifier), and as such can be used following the normal
preset recall procedure. The presets available are:
R5N.flat
R5W.flat
As mentioned above, these presets are intended to be a starting point and additional work
may be required depending on the venue, the style of content and the end result you are
looking for.
80° x 50° waveguide R5 preset
110° x 50° waveguide R5 preset
The four amplifier channels appear on four
speakON connectors on the rear of the DQ
Series amplifiers. R5 loudspeakers require one
amplifier channel.
Page 24 of 37
R5 User Manual
v1 December 2023