Powering The System; Amplifier And Processing Requirements; Connections - EM Acoustics R5 Product User Manual

6.0 – Powering the System
The R5 makes use of FIR (Finite Impulse Response) processing, and as such requires
specific proprietary DSP settings that are only available within the DQ or Di Series
amplifiers, or the DSC48 system controller. These complimentary electronics packages also
provide all necessary high pass, limiting and protection systems to ensure the best
performance out of the R5.
The R5 should not be used with any other amplification or processing platform.

6.1 - Amplifier and Processing Requirements

6.1.1 - Connections

The R5 requires only a single amplifier channel. Inputs to the R5 enclosure are on Neutrik
SpeakON NL4 as illustrated below.
Two-core cable should be used for connecting R5 loudspeakers, and the connections are
as follows:
SpeakON connection
Drive unit connection
1+ 1-
LF + LF -
Page 21 of 37
2+ 2-
Link Through Link Through
R5 User Manual
v1 December 2023