The packaging supplied with this product is recyclable. Please retain all packaging, however if disposing of this packaging please ensure that you comply with local recycling regulations. These products also all comply to the RoHS Directive 2002/95/EC. MSE-159SP User Manual v1.0 May 2012...
– the amplifier module should only be opened by qualified personnel. Please refer any service issues to your local EM Acoustics representative. Upon completion of any service or repairs to this product, please ensure your dealer or distributor has performed safety checks to determine the loudspeaker is in proper operating condition.
Page 5
Never spill liquid of any kind on the loudspeaker. ACCESSORIES Only use accessories supplied by EM Acoustics specifically for use with this product. Unsuitable accessories for mounting or flying this loudspeaker could fail, causing serious physical injury and/or damage to the loudspeaker.
Page 6
ONLY CONNECT THIS PRODUCT TO MAINS POWER USING THREE CORE MAINS POWER CABLE WITH A SUITABLE GROUNDING CONNECTION. REMOVAL OF THE GROUNDING CONNECTION IS EXTREMELY DANGEROUS AND MAY VIOLATE LOCAL ELECTRICAL CODES OF CONDUCT. MSE-159SP User Manual v1.0 May 2012...
EM Acoustics representative. The MSE-159SP system is one of the most accurate and powerful 2-way loudspeakers on the market today. The marriage of the utmost in drive unit technology, EM Acoustics unrivalled experience with passive crossovers along with a state-of-the-art amplifier and control electronics package creates an ideal solution to a variety of applications.
Page 8 of 25 2.0 – The MSE-159SP Loudspeaker The MSE-159SP is the self-powered variant of the MSE-159 loudspeaker, and as such follows all the same principles in design and operation. The MSE-159SP is unique in that it powered-passive is a loudspeaker –...
200-240VAC. 3.2 - AC Input Connector (BLUE) The blue Neutrik PowerCON connector supplies mains power to the MSE-159SP. This connector is rated at 20 amps and is locking to prevent accidental disconnection. Any...
Electrical Safety Issues Please pay close attention to the following electrical and safety issues: a) The MSE-159SP requires a grounded mains outlet. Always use a grounded outlet and plug. b) Never use a ground-lifting adapter or cut the earth pin or cable.
Page 11 of 25 4.0 – Amplification and Audio The MSE-159SP includes a highly advanced 64-bit DSP processing card to handle high pass filters, gain and delay settings, which are accessed by means of preset programs that are factory installed into the unit. This DSP card feeds a Class-D amplifier package (single channel) providing ample power to drive your loudspeakers to their full potential.
The advanced DSP card within the amplifier modules handles all crossover, gain and limiting functions for the MSE-159SP. The user interface is via a backlit LCD screen on the rear of the unit, which provides a very intuitive means of accessing relevant information as well as recalling presets for different system configurations.
4.3.4 - EDIT encoder function The Edit encoder is the primary control for the user when operating the MSE-159SP. From the opening display screen (which displays the unit name – which by default is “MSE- 159SP”...
Do not modify or alter the MSE-159SP hardware or accessories, nor use them in any way other than that described in this manual. Rigging components supplied as part of the MSE-159SP system are in no way interchangeable and should not be used as such.
5.1.2 - Safety Inspections Carefully inspect all flying system components prior to use for defects or signs of damage prior to flying your MSE-159SP. If any components damaged or you suspect them to be damaged, DO NOT USE THEM. Regular scheduled tests – which are much more rigorous than visual inspections – of all rigging components must also be carried out.
Page 16
The MSE-159SP has three options for mounting and suspension, both for temporary use and permanent fixed installation. The MSE-159SP is fitted with bespoke flying plates top & bottom of the enclosure to enable suspension in a variety of ways. Simple suspension is available using M10 forged shoulder eyebolts (minimum thread length 20mm) in the M10 threaded holes in the flying plates.
If you are in any doubt whatsoever, please contact your EM Acoustics dealer who will be able to refer you to an experienced rigging company. A reputable rigging organisation should also be able to advise on legislation regarding safety factors for suspended systems of this type.
IMPORTANT: DO NOT ATTEMPT TO LIFT THE LOUDSPEAKER WITHOUT BOTH BALL-LOCK PINS IN PLACE. Finally, attach a hook-clamp to the sliding mounting point and secure the mounting point bolt through the MSE-159SP User Manual v1.0 May 2012...
Page 19
M8 point on the rear of the enclosure as a pull-back. Ensure that an eyebolt is secured to one of the rear points on the MSE-159SP (M8 at the rear) or one of the top points (M10 on top or bottom) to use as a secondary safety.
Page 20 of 25 6.0 - Servicing Information Your EM Acoustics loudspeakers have been rigorously tested before they leave our factory, to ensure that they give you a lifetime of flawless operation. Should any of your drive units fail and need replacing, please follow the guidelines below.
5VDC fan on heatsink – temperature controlled, only required under extreme conditions CONNECTORS: Female XLR input, male XLR link output (selectable as analog or AES/EBU input) Neutrik PowerCon input with loop output Neutrik Ethercon RJ45 socket MSE-159SP User Manual v1.0 May 2012...
Page 22
1.4A RMS @ 230V 2.8A RMS @ 120V POWER COMSUMPTION: 411W nominal 1600W maximum Notes on measurement conditions: Measured on-axis Average SPL over stated bandwidth with 1W input, measured at 1m Nominal dispersion, averaged over stated bandwidth MSE-159SP User Manual v1.0 May 2012...
EM Acoustics or its representatives are in no way liable for any loss or damage in transit, and hence it is recommended that the sender insure the shipment. EM Acoustics will pay for return freight should the repair be covered under warranty.
Page 25 of 25 EM Acoustics’ liability is to the replacement or repair (at our discretion) of any defective components, and as such are not liable for any incidental and consequential damages including (without limitation) injury to persons, damage to property or loss of use.