Table of Contents
Advertisement
Quick Links
EMS-51 Compact Fill Loudspeaker
User Manual – v1.0
EM Acoustics Loudspeakers
Building 74, Dunsfold Park
Cranleigh, Surrey
GU6 8TB, UK
Phone +44 (0) 1483 266520
Fax +44 (0) 1483 275619
www.emacoustics.co.uk
_________________________________________________________________________________________
Copyright EM Acoustics 2012
1
EMS-51 User Manual
www.emacoustics.co.uk
Advertisement
Table of Contents
Related Manuals for EM Acoustics EMS-51
Summary of Contents for EM Acoustics EMS-51
- Page 1 EMS-51 Compact Fill Loudspeaker User Manual – v1.0 EM Acoustics Loudspeakers Building 74, Dunsfold Park Cranleigh, Surrey GU6 8TB, UK Phone +44 (0) 1483 266520 Fax +44 (0) 1483 275619 www.emacoustics.co.uk _________________________________________________________________________________________ Copyright EM Acoustics 2012 EMS-51 User Manual www.emacoustics.co.uk...
-
Page 2: Table Of Contents
Introduction Thank you ...……………………………………………………………………………………………………………………………. 3 Unpacking ……………………………………………………………………………………………………………………………….. 3 Declaration of Conformity …………………….…………………………………………………………………………………… 3 Product Overview EMS-51 passive two-way fill enclosure ..……………………………………………………………………………… 4 System Set-up Safety Considerations………………………………………………………………………………………………………………… 5 Cabling & Amplifier selection ……………………………………………………………………………………………………… 6 Protective DSP Settings ......................... 7 Mounting & Rigging Options Rigging Hardware &... -
Page 3: Thank You
INTRODUCTION Thank you Thank you for purchasing a product from the acclaimed EMS Series from EM Acoustics. The EMS Series products have been carefully designed and rigorously tested to ensure years of flawless operation and unprecedented sonic quality. Flexibility is the key factor with EMS products, and consequently they are at home within a wide variety of applications from live and portable applications, through to cafes, bars, nightclubs, theatres and conference centres. -
Page 4: Product Overview
1.1” (28mm) soft dome high frequency drive unit. These components are matched by an internal passive crossover network for unprecedented sonic quality from a completely passive enclosure. Due to its discreet size and appearance, and the included YK-51v and YK-51h mounting yokes, the EMS-51 can be used in a wide variety of applications. -
Page 5: System Set-Up
Damage to the ear can result from levels above 90dB under prolonged exposure. Stand Mounting The EMS-51 can be mounted from a microphone stand when using the supplied yokes, or the PM-61 adapter for a standard 35mm loudspeaker stand. When mounting in this way, please consider the following: Ensure your stand height is locked off and the tripod legs are positioned so as to be stable. -
Page 6: Cabling & Amplifier Selection
Cabling and Amplifier Selection The EMS-51 is designed to be used with professional power amplifiers providing the following power outputs: EMS-51 400W/channel into eight ohms... -
Page 7: Protective Dsp Settings
– we would stress that the higher the filter, the safer the loudspeaker will be. If you are in any doubt over suitable settings for your EMS-51, please don’t hesitate to contact EM Acoustics or your local dealer for support and advice. -
Page 8: Mounting & Rigging Options
A safety steel can then be attached to this and connected to your safety point. If you are in any doubt whatsoever about how to safely suspend your loudspeakers, do not hesitate to contact your EM Acoustics representative who will be able to refer you to a qualified rigging company for advice. -
Page 9: Flying Yoke Use
– the flat washer should be in contact with the yoke, and the spring washer will sit between the flat washer and the locking knob. Once the desired angle is set, tighten the knobs to lock the position in place. EMS-51 User Manual www.emacoustics.co.uk... -
Page 10: Maintenance
MAINTENANCE Your EM Acoustics loudspeakers have been rigorously tested before they leave our factory, to ensure that they give you a lifetime of flawless operation. Should any of your drive units fail and need replacing, please follow the guidelines below. -
Page 11: Warranty
Serial numbers must be quoted in all correspondence relating to the claim. EM Acoustics or its representatives are in no way liable for any loss or damage in transit, and hence it is recommended that the sender insure the shipment. -
Page 12: Appendix A - Technical Specifications
APPENDIX A – TECHNICAL SPECIFICATIONS EM Acoustics operates a continuous process of research and development, and as such reserves the right to alter specifications without notice. EMS-51 ENCLOSURE TYPE: two-way passive, infinite baffle DIMENSIONS (HxWxD): 250 (9.9) x 140 (5.5) x 175 (6.9) mm/(ins) NET/SHIPPING WEIGHT: 4.5/5.2kg (9.9/11.7lbs)