Table of Contents
Advertisement
Page 20 of 37
5.7 – Using Powerdrive or Omnimount fittings
R5 loudspeakers are compatible with Powerdrive Series 75 or Omnimount Series 30
installation brackets.
Using a 4mm Allen key, remove the four M6 countersunk socket head bolts on the rear of
the R5. The mounting bracket can then be attached using the bolts supplied with the
bracket – they must be M6 thread, minimum 25mm in length. Ensure flat washers are in
contact with the bracket, and the spring washer is in between the bolt head and the flat
washer.
Omnimount/Powerdrive mounting points
Step 1
Remove M6 countersunk socket bolts from the rear
Step 2
Attach bracket using supplied fixings.
Form A (flat) washer
Spring washer
M6 bolt, minimum 25mm length
R5 User Manual
v1 December 2023
Advertisement
Table of Contents
