FC-R5v
Vertical flying cradle
PM-61 Stand Adapter
Simple stand mounting
Cradle stand adapter
Stand
mounting
with
flying cradles
The FC-R5v is a simple and effective means of mounting the R5 vertically in
both temporary and permanent applications.
It is secured to the cabinet by means of a quick-release keyhole plate in the
top of the loudspeaker to mount it in a portrait format. A single 13mm diameter
fixing point is provided at the top of the outer yoke for attachment either in
installations or via a hook clamp or similar. Two M10 threaded fittings are
provided to allow mounting onto a 35mm loudspeaker stand using the Cradle
Pole Adapter.
The FC-R5v is designed to support one single R5 loudspeaker.
Weight (including fixings) 1.75kg / 3.9lbs
For simple mounting on a loudspeaker stand or pole, the R5 is packaged with a
screw-in 35mm adapter. The adapter attaches via the central M8 threaded
point in the bottom of the R5.
The stand adapter is designed to support one single R5 loudspeaker.
Weight (including fixings) 0.75kg / 1.7lbs
To allow the mounting of the R5 on a stand yet keeping the ability to tilt the
loudspeaker, the R5 cradles can both be used with this optional accessory.
Using the supplied M10 fixings, the cradle stand adapter attaches to the flying
cradle allowing it to be mounted directly onto a loudspeaker stand.
The cradle pole adapter is designed to support one single R5 loudspeaker.
Weight (including fixings) 0.5kg / 1.1lbs
Page 7 of 37
R5 User Manual
v1 December 2023