Servicing Information; R5: Removing The Grille - EM Acoustics R5 Product User Manual

7.0 – Servicing Information
All R5 components can be removed for service purposes if required, using the minimum of tools.
7.1 – R5: Removing the grille
TOOLS REQUIRED: 4mm Allen key
1. Lie the enclosure on its' back and remove the two M6x30 countersunk socket screws from each end
using a 4mm Allen key, and then lift the grille clear of the cabinet.
2. To replace the grille, position the grille on the front of the R5 and ensure the threaded fittings on the
grille are lined up with the mounting holes – gentle pressure may be required. Replace all of the M6x30
countersunk socket screws and ensure they are all are started in their threads before beginning to
tighten. Ensure they are all tightened evenly so that the grille sits straight and does not rattle. Be
careful not to over-tighten as this will distort the grille.
Page 26 of 37
M6x30 countersunk socket
machine screws
R5 User Manual
v1 December 2023