Table of Contents
Advertisement
Page 23 of 37
6.2 - Presets and Settings
6.2.1 – Standard R5 presets
When used with a DQ or Di Series amplifier R5 loudspeakers require only a single amplifier
channel, and as such the preset recalled will only require one output from your amplifier.
Two standard presets are in the EM Acoustics preset library – one for the narrow (80x50)
waveguide, and one for the wide (110x50). Whilst the difference is subtle, please ensure
the correct preset is loaded for the waveguide that has been installed for optimum
performance.
6.2.2 - Geometric Delay
Appropriate delay will need to be applied to account for physical location differences
between different elements of your system – for example time-aligning subwoofers to the
main system. The use of SMAART or similar can make this task a great deal simpler and
faster.
6.2.3 - Applying EQ
The presets are intended to be a starting point for your system and will almost certainly
require tuning on-site dependent on room characteristics, the rest of your system design
and the system voicing you are aiming for. The R5 is designed with a significant amount
of system headroom, so applying EQ is perfectly acceptable within sensible limits.
R5 User Manual
v1 December 2023
Advertisement
Table of Contents
