Use With The Dq Series Advanced System Amplifiers; Connections; Preset Recall - EM Acoustics EMS-41 Product User Manual

6.3 - Use with the DQ Series Advanced System Amplifiers

The EMS-41 will perform best when using DQ Series advanced system amplifiers, as not only are
they state-of-the-art amplifiers, but the onboard DSP provides appropriate high/low pass filter
settings and limiters to get the best from your subwoofers. Please refer to the DQ Series User
Manual for detailed information on using the amplifiers and the System Engineer software.

6.3.1 - Connections

6.3.2 - Preset Recall

The EMS-41 preset is pre-installed on the DQ amplifiers, and as such can be used following
the normal preset recall procedure. The presets available are:
EMS-41.full
As mentioned above, these presets are intended to be a starting point and additional work
may be required depending on the venue, the style of content and the end result you are
looking for.
Standard EMS-41 preset
The four amplifier channels appear on four
speakON connectors on the rear of the DQ Series
amplifiers. EMS-41 loudspeakers require one
amplifier channel.
Page 18 of 25
EMS-41 User Manual
v1 November 2019