Table of Contents
Advertisement
Section 5 Trimmer Line
To replace trimmer line, bend a new 16" precut line into
two equal lengths, insert the line ends into the holes on
the trimmer head. The head will automatically route the
line out the correct hole. Pull each end taught and adjust
if uneven. Refer to Figure A.
Any 0.095"- 0.135" line is acceptable however to order
more of the included trimmer line P#(ZT-0129), contact
PECO at (800) 438-5823.
Section 6 Battery Box Mounting
The Battery Box is designed to fit most styles of mower ROPS however it
can be mounted anywhere that is suitable. Ensure the included battery
extension cable can reach and will be free of any interference before
securing.
Secure the Battery Box using (4) 5/16 "-18 x 3" Hex Bolts P#(K1472) (4)
5/16"-18 Nylon Flange Locknuts P#(K2516) and (2) Battery Box Clamps
P#(ZT-0126)
Figure A
Insert Line
Into Both Holes
Pull Line Through
Until They're Even
9
Advertisement
Table of Contents
