Table of Contents
Advertisement
EXCELL PRECISION CO., LTD
2-1-3 HI/LO/OK Settings
When the high limit and low limit are both set as "0", the Hi/Lo/OK function is disabled.
Press
key
TARE
Key in the desired high
limit value
Press
key
TARE
Key in the desired low limit
value
Press
key
TARE
Key in the parameter
setting for alarm
Press
key
TARE
ON/ZERO key ⇒ Upward key (0~9 digit entry)
UNITS key ⇒ Downward key (0~9 digit entry)
02005302
lb
LCD displays the last status
.
lb
.
lb
LCD displays the last status
.
lb
.
NET/GROSS key ⇒ Move cursor leftward
TARE key ⇒ Move cursor rightward
16
LCD displays the last status
Alarm setting
(a)(b)(c)
The definition of a, b, c positions:
(a) ⇒ 1 = beep sound on
0 = beep sound off
(b) ⇒ 1 = beep sound on when stable
0 = beep sound on when unstable
(c) ⇒ 1 = beep sound on when the weight is
between high and low limits
0 = beep sound on when the weight is
not between high and low limits and
higher than 10d (d=division)
ZSME300000237
Advertisement
Table of Contents
