EXCELL PRECISION CO., LTD.
2-1-2 FnC 02 Automatic Power-off Timer Setting
Press
key
TARE
Press
key
TARE
ON/ZERO key Upward key (from 0 to 9)
UNITS key Downward key (from 9 to 0)
TARE key Move the cursor to right
NET/GROSS key Move the cursor to left.
2-1-3 FnC 03 Hi/Lo/OK Function Setting
When the high limit and low limit are both set as "0", the Hi/Lo/OK function is disabled.
This function is available in all unit modes. In one specific unit mode, enter FnC 03 to set
the Hi/Lo/OK values.
Press
key
TARE
Press
key
TARE
Press
key
TARE
Press
key
TARE
020261XX/020264XX/020268XX
020311XX/020314XX/020318XX
LCD displays the last saved status. Key in the
desired high limit value, then press
LCD displays the last saved status. Key in the
lb
.
desired low limit value, then press
LCD displays the last saved status.
lb
Alarm setting
.
Automatic power-off timer setting
Use
or
ON/ZERO
UNITS
0 No auto power-off
1 When the scale is idle for 1 minute, the scale
automatically switches off
2 When the scale is idle for 2 minutes, the scale
automatically switches off
9 When the scale is idle for 9 minutes, the scale
automatically switches off
Automatic power-off function
When the scale is idle near zero (< 10d) without any
key being pressed, the scale will automatically switch
off once it reaches the set time (1~9 minutes).
(a) (b) (c)
(a) 1 = beep sound on
0 = beep sound off
(b) 1 = beep sound on when stable
0 = beep sound on when unstable
(c) 1 = beep sound on when the weight is between high and
low limits
0 = beep sound on when the weight is not between high
and low limits and higher than 10d
key to key in parameter
key.
TARE
key.
TARE
ZSMT300000351