Table of Contents
Advertisement
EXCELL PRECISION CO., LTD
2-3-5 Selection of the Continuous Transmission Rate
Press
key
TARE
Use the
or
ON/ZERO
keys to select the continuous
transmission rate.
Press
key
TARE
Key in the parameter "00"
Press the
key to exit
TARE
RS232 2-way serial
interface settings
02005302
UNITS
Continuous transmission rate setting
The LCD shows the last setting.
Default setting:
Continuous transmission rate
Use
or
ON/ZERO
the continuous transmission rate:
= 1 time/sec
= 2 times/sec
= 4 times/sec
= 8 times/sec
= More than16 times/sec
Note:
Actual output time may be affected by
different hardware.
ON/ZERO key ⇒ Upward key (0~9 digit entry)
UNITS key ⇒ Downward key (0~9 digit entry)
TARE key ⇒ Move cursor rightward
NET/GROSS key ⇒ Move cursor leftward
27
keys to select
UNITS
= 16 times/sec
ZSME300000237
Advertisement
Table of Contents
