EXCELL PRECISION CO., LTD
2-3-6 Auto Transmission at Zero
Press
key
TARE
Use
or
ON/ZERO
UNITS
keys to key in the desired
parameters
Press
key
TARE
Key in the parameter "00"
Press the
key to exit
TARE
RS232 2-way serial
interface settings
When the value of "Auto transmission at zero" set as
zero" function is not available. Because when the scale is at zero and keeping stable, the
data are keeping transmitted, and that would be the same as "Continuous Transmission".
02005302
Auto transmission at zero
LCD shows the last setting
Default setting:
Auto transmission at zero
Use ON/ZERO or UNITS keys to key in the
desired parameters:
ON/ZERO key ⇒ Upward key (0~9 digit entry)
UNITS key ⇒ Downward key (0~9 digit entry)
TARE key ⇒ Move cursor rightward
NET/GROSS key ⇒ Move cursor leftward
28
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
, the "Auto transmission at
ZSME300000237