Hi/Lo/Ok Function Setting - Excell ESW-E User Manual

EXCELL PRECISION CO., LTD.

2-1-3 Hi/Lo/OK Function Setting

Select
Hi/Lo/OK function. This function is available in all unit modes. In one specific unit mode,
enter
ACTIONS
When the high limit and low limit are both set as "0", the Hi/Lo/OK function is disabled.
Press TARE key
Key in the desired high
limit value
Press TARE key
Key in the desired low limit
value
Press TARE key
Key in the parameter
setting for alarm
Press TARE key
Key in the parameter
Advanced function setting menu
02005324
in the General Function setting mode
to set the Hi/Lo/OK values.
DISPLAY
.
.
.
.
and then press TARE key to go back to the
ON/ZERO key ⇒ Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
LED displays the last status
LED displays the last status
LED displays the last status
Alarm setting
(a) (b) (c)
The definition of a, b, c positions:
(a) ⇒ 1 = beep sound on
0 = beep sound off
(b) ⇒ 1 = beep sound on when stable
0 = beep sound on when unstable
(c) ⇒ 1 = beep sound on when the weight is
0 = beep sound on when the weight is not
12
to set the
NOTE
between high and low limits
between high and low limits and
higher than 10d
ZSME300000276