Sensawake - F&P SleepStyle Auto Technical Manual

Clinician Guide – Page 12
A-12 ENGLISH

5.3 SensAwake™

In this menu, SensAwake can be Activated or
Deactivated.
If Activated, the SensAwake pressure can be
set between 4 and 20 cmH
increments. The default setting is Activated and
the default SensAwake pressure is 4 cmH
You can also select whether the patient is able to
turn SensAwake On or Off. Patients cannot adjust
the SensAwake pressure.
1. Press Down or Up
"SensAwake" setting.
2. Press OK to select "SensAwake".
3. You will be asked if you would like to "Activate
SensAwake". Press Down
change the setting.
4. Press OK
to accept the change.
If you have Activated SensAwake:
5. Press Down or Up
SensAwake pressure.
6. Press OK to confirm your
selection.
O, in 0.5 cmH O
2 2
You will be asked if you would like to "Allow patient
O.
2
to deactivate?". This allows you to set whether the
patient can turn SensAwake On or Off.
7. Press Down
to scroll to the
8. Press OK
Note: In Auto mode, SensAwake pressure cannot
be set above the minimum pressure. In CPAP
mode, SensAwake pressure cannot be set above
or Up to
the prescribed fixed pressure. This is the pressure
the patient will receive when they start therapy
until a sleep-disordered breathing event occurs.
to change the
or Up
to change the
setting.
will allow the patient to turn
Yes
SensAwake On or Off. No
SensAwake from the Patient Menu. SensAwake
will still run in the background as set up by the
clinician.
to accept the change and exit to
the main Clinician Menu.
will remove
F&P SleepStyle Product Technical Guide | 54