JAI Apex Series User Manual page 47

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Notes:
When IndividualGainMode is set to On, GainAuto will be fixed at Off.
l
Once or Continuous will not be executed when:
l
The image is not output.
l
Outputting a Test Pattern.
l
In Sequencer Mode, MultiRoi mode, or SensorMultiRoi mode (AP-1600T-USB only).
l
AGC (Auto Gain Control) cannot operate due to the ROI settings (Height is less than 4 pixels)
l
The names of the ALC operations by Gain and by ExposureTime are as follows.
l
ALC operation by Gain: AGC (Auto Gain Control)
l
ALC operation by ExposureTime: ASC (Auto Shutter Control)
l
Auto Gain Metering Areas (16 Areas)
High High High
Left Mid-Left Mid-Right
Mid-High Mid-High Mid-High
Left Mid-Left Mid-Right
Mid-Low Mid-Low Mid-Low
Left Mid-Left Mid-Right
Low Low Low
Left Mid-Left Mid-Right
High
Right
Mid-High
Right
Mid-Low
Right
Low
Right
- 47 -
Main Functions