JAI Apex Series User Manual page 40

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
TriggerSelector
AcquisitionTransferStart
Note: The settings for exposure control and triggers are related to each other. Be sure to
configure the settings described in
Shortest Repetition Period for Triggers
The reciprocal of the maximum frame rate is the time required to output one frame. The shortest
repetition periods for triggers cannot be lower than that value.
Scanning Range
Height BGR8 (8bit) BGR10p (10bit) BGR12p (12bit) Height BGR8 (8bit) BGR10p (10bit) BGR12p (12bit)
Full 1088
ROI (1/2) 544
ROI (1/4) 272
BinningVertical = 2 544
The above table indicates the shortest trigger periods for when Trigger OverLap is set to Readout.
When Trigger OverLap is set to Off, the exposure time is added to the period.
Output acquired images at a specified timing in response to an external trigger
signal input.
Note: There is a limit to the number of image frames that can be stored
internally. The limits for each image format are as follows.
8bit: Up to 16 frames
10bit /12bit: Up to 8 frames
"Exposure
AP-1600T-USB
12.7ms 15.9ms
6.3ms 7.9ms
3.2ms 4.0ms
6.3ms 7.9ms
Description
Mode".
19.0ms 1544 26.1ms
9.5ms 772 13.3ms
4.8ms 386 6.9ms
9.5ms 772 26.1ms
- 40 -
Main Functions
AP-3200T-USB
32.6ms 39.1ms
16.6ms 20.0ms
8.7ms 10.4ms
32.6ms 39.1ms