JAI Apex Series User Manual page 85

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Sequencer Control Item
SequencerBinning
Horizontal
SequencerBinning
Vertical
SequencerLutEnable
SequencerBlackLevel
DigitalAll
SequencerRepetition
SequencerLutMode
SequencerSetActive
SequencerCommand Index
Setting Range
1: Off
2: x2
1: Off
2: x2
True
False
- 133 ~ 255
1 ~ 255
Gamma
LUT
1 ~ 128
1 ~ 128
Default
For the selected SequencerIndex, set the
number of pixels in the horizontal direction for
which to perform binning.
1
Note: See
when in VideoProcessBypassMode.
For the selected SequencerIndex, set the
number of pixels in the vertical direction for which
to perform binning.
1
Note: See
when in VideoProcessBypassMode.
Set the LutEnable setting of the selected
False
SequencerIndex.
Set the black level value for the selected
0
SequencerIndex.
This parameter applies to Trigger Sequencer
patterns which include an index whose
Sequencer ROI Next Index is set to OFF. When
the index whose Sequencer ROI Next Index is
set to OFF is finished executing, the value of
Sequencer Repetition is decremented internally.
1
If the result of the decrement is not zero, the
Trigger Sequencer pattern starts over from the
index specified in SequencerSetStart. If the
result of the decrement is zero, the status
changes to Acquisition Stop and external
triggers are not accepted.
Define whether to apply gamma or LUT to the
sequence. When Gamma is selected, the
gamma setting defined in
Gamma applied to all exposures in the sequence. When
LUT is selected, the LUT characteristics defined
in AnalogControl are applied to indexes for which
SequencerLUT enable is set to ON.
This allows you to confirm the currently
1
configured index number.
Set this to change the SequencerIndex. (Enabled
1
only for CommandSequencer.)
- 85 -
Setting List (Feature Properties)
Description
"Binning Function" for limitations
"Binning Function" for limitations
AnalogControl is