JAI Apex Series User Manual page 104

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Item
Power supply (12-pin
Connector)
Lens Mount
Flange back
Optical filter
Verified performance
temperature / humidity
Storage temperature /
humidity
Regulations
Dimensions (housing)
Weight
Notes:
Design and specifications are subject to change without notice.
l
Approximately 30 minutes of warm-up are required to achieve these specifications.
l
Cautions:
About the verified performance temperature:
Make sure the following temperature conditions are met when operating the unit.
The camera's internal temperature should not exceed 72°C during operation.
l
The top surface of the camera's should not exceed 57°C.
l
If the above temperature conditions are exceeded, take measures to dissipate heat according to
your installation environment and conditions.
Input range DC + 12 V ~ + 24 V ± 10 % (via Input Terminal)
5.3 W (typ.) ( at 12V input, full pixel, Default setting, Environmental Temperature 25 °C) ,
Consumption
6.7W (max.)
C-mount Lens mount protrusion length of 4 mm or less is supported
17.526, tolerance: 0 mm to -0.05 m
IR Cut Filter: AP-1600T-USB, AP-1600T-USB-LSX
− 5°C ~ + 45°C / 20 % ~ 80 % (non-condensing)
− 25°C ~ + 60°C / 20 % ~ 80 % (non-condensing)
CE (EN61000-6-2 and EN61000-6-3) , FCC part 15 class B, RoHS, WEEE, KC
44 × 44 × 74 mm (WHD) (excluding mount protrusions)
170 g
Description
- 104 -
Miscellaneous