JAI Apex Series User Manual page 26

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Manual Adjustment
1. Set GainAuto and IndividualGainMode (AnalogControl) to Off. (Default = Off)
2. Configure the Gain.
Select the gain you want to configure in GainSelector.
l
Configure the gain value in Gain.
l
AnalogAll (master gain) can be set to a value from x1 to x8 (0 dB to about +18 dB) the
l
analog gain value. The resolution is set in x0.1 steps. Values are configured by multipliers.
The AnalogRed (R gain) and AnalogBlue (B gain) can be set to a value from x0.47 to x4.0
l
(–6.5 dB to +12 dB) the AnalogAll (master gain) value.
The DigitalRed (digital R gain) and DigitalBlue (digital B gain) can be set to a value from
l
x0.9 to x1.1 (–0.915 dB to +0.828 dB) the AnalogAll (master gain) value.
Note: The following two methods are available for adjusting the gain manually.
MasterMode (set IndividualGainMode to Off) (see the above)
l
IndividualMode (set IndividualGainMode to On)
l
For more information, see "Gain Control".
- 26 -
Preparation