Xerox DocuTech 6100 Operator's Manual page 81

DocuTech 61xx Operator Guide
Figure 5-40. Locating the binder tape knob
The knob is spring loaded and moves in increments to
change the location of the binder tape. Each increment
equals a change of 0.1mm, up or down, on the edge of the
book. One full rotation of the knob is equal to 0.04 inch
(1mm).
6. Pull the knob toward you to rotate it for the adjustment.
7. Adjust the tape position by performing one of the following
steps:
• Pull the knob and rotate it clockwise to move the tape
toward the top edge of the book, as shown in figure 5-41.
Routine maintenance
5-39