Cleaning The Binder Tape Guides - Xerox DocuTech 6100 Operator's Manual

Cleaning the binder tape guides

DocuTech 61xx Operator Guide
Figure 5-6. Binder platen cleaner
b. If binder tape is in the area of the cleaner, pull the reel
slightly away from the tape to avoid tape damage.
c. Lift up on the cleaner and push down against the single
end tab. Move the cleaner back and forth until the end
tab breaks.
d. Continue to move the cleaner in the same manner until
the 2-sided tabs break.
NOTE: Ensure that the following cleaning procedures are
performed in the order listed.
The following steps must be performed to clean the binder tape
guides.
1. Use the binder platen cleaner to clean the surfaces and
grooves of the tape guides.
2. Ensure that all the glue is removed from the grooves on the
tape guides.
Routine maintenance
5-9