Xerox DocuTech 6100 Operator's Manual page 126

Technical information
Table 7-7. Satisfaction guide for paper tray 4
Reliable feeds may be
Stock expected
Type or Xerographic bond paper in
condition good condition
Drilled stock, fanned
thoroughly
Table 7-8. Satisfaction guide for paper tray 5
Reliable feeds may be
Stock expected
Size 8 x 10 inches to 17 x 11
inches (203 x 254 mm to
432 x 279 mm)
Weight Substance 16 to 110 (60 to
200 g/m2)
Capacity 2600 sheets, substance
20 (75 g/m2)
Type or Xerographic bond paper in
condition good condition
Drilled stock, fanned
thoroughly
Table 7-9. Satisfaction guide for 2-sided printing
Reliable feeds may be
Stock expected
Size 8 x 10 inches to 17 x 11
inches (203 x 254 mm to
432 x 279 mm)
7-10
Less reliable feeds may be
expected
Slightly curled paper
Intermixed weights
Xerox vellum
Full cut tabs
Label stock
Adhesive drafting film
Paper with reinforced edges
Less reliable feeds may be
expected
Slightly curled paper
Intermixed weights
Xerox vellum
Full cut tabs
Label stock
Adhesive drafting film
Paper with reinforced edges
Less reliable feeds may be
expected
Suggested alternatives
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Refer to the "Using various
stocks" section for any stock
not defined in this guide.
Suggested alternatives
Smaller or larger sizes
cannot be used.
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain except 17
x 11 inch (432 x 279 mm)
substance 110 (200 g/m2)
which must be short grain.
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Refer to the "Using various
stocks" section for any stock
not defined in this guide.
Suggested alternatives
17 x 11 inch (432 x 279 mm)
paper can only be sent to
the top tray.
DocuTech 61xx Operator Guide