Xerox DocuTech 6100 Operator's Manual page 134

Technical information
Reliable stacking may be
Stock expected
Set size limits Maximum collated:
125 sheets of substance
20 (75 g/m2) or equivalent
thickness
Minimum collated:
15 sheets of substance 20
(75 g/m2) (7 sheets with
index covers) or
equivalent thickness
Maximum uncollated:
100 sheets of substance
20 (75 g/m2)
Minimum uncollated:
15 sheets of substance 20
(75 g/m2) (7 sheets with
index covers) or
equivalent thickness
Stacker Delivers 12 sets inboard
capacity and 12 sets outboard
Type or Xerographic bond paper in
condition good condition
Drilled paper
Reliable stacking may be
Stock expected
Size 8 x 10 inches to 11 x 17
inches (203 x 254 mm to
279 x 432 mm)
7-18
Table 7-15. Binder satisfaction guide
Less reliable stacking may
be expected
125 sheets of substance 16
(60 g/m2)
Slightly curled paper
Table 7-16. Top tray satisfaction guide
Less reliable stacking may
be expected
Intermixed sizes
Suggested alternatives
Consider stitching for set sizes
smaller than 15 sheets (or
equivalent thickness).
Reduce the number of sheets
to maintain a maximum set
thickness of 0.5 inch (13 mm)
when using heavier than
substance 20 (75 g/m2) for
main body or inserts.
To allow continuous run,
unload outer stack before
inner stack reaches capacity.
Avoid the following:
• Coated papers
• Drilled stock with
reinforced edges
• Transparencies as inserts
• Excessively curled paper
• Never-tear paper
Stock not defined here is
included in the "Using various
stocks" section in this guide.
Suggested alternatives
Smaller or larger sizes cannot
be used.
DocuTech 61xx Operator Guide