Clearing the camming motor
DocuTech 61xx Operator Guide
Figure 6-17. Locating the Q1221, Q1218, and Q1227
sensors
Figure 6-17 shows the following sensors:
1. Q1221 sensor
2. Q1218 sensor and the sensor detector
3. Q1227 sensor and the sensor detector
3. Brush a folded sheet of paper across the sensor to clear any
obstruction.
4. Close the finisher doors.
Clearing the camming motor should be performed only when
directed by a Customer Support Center Representative.
NOTE: The fuser camming motor may stall during operation due
to a system crash or system power failure. The camming motor
must then be manually released.
Problem solving
6-25